This is how you flash your Android Phone with the RockChip Factory Tool

[Daniel]

If your smartphone or device is running on a RockChip chipset and it develops a software problem, you might want to flash a new or updated firmware to it to fix those problems.

RockChip firmware files usually come in a .img or .bin format, and the right tool to flash those types of files to an Android device requires a tool like RockChip Factory Tool.

This step-by-step will show you how you can use the tool to flash firmware files to your device and fix any software-related problems on those devices.

When you might need this tool

You should do this if your device:

• Gets stuck on the starting screen.
• Is very slow or keeps stopping.
• Needs a newer version of its program.
• Got broken during a bad update.

What you need to have before you begin.

Get these things ready first:

1. A Windows computer.
2. The new program file (called firmware). It must be the correct one for your device. It is a file that ends in .img or .bin.
3. The RockChip Factory Tool program.
4. Helper files (called drivers) that let your computer and device communicate with each other.
5. A good USB cable.
6. Your device must have enough battery power (at least half full).

Step-by-Step Instructions

Step 1: Install the Driver Files

• Install the device driver you have downloaded to your PC.
• Restart the computer after you finish the driver installation.

Step 2: Get the Tool Ready

• Find the RockChip Factory Tool folder and open it.
• Right-click the main program (FactoryTool.exe) and choose "Run as Administrator".
  

Step 3: Choose the New Program

• Click the button that says "Firmware" in the tool.
• Find your new program file (the .img or .bin file) and select it.

Step 4: Connect the Device

• Turn your device completely off.
• Press and hold a special button on your device (usually Volume Up or Volume Down).
• While still holding the button, plug the USB cable into the device and the computer.
• The tool should show a green box. Green means the computer sees your device!

Step 5: Start the Fix!

• Click the "Run" button in the tool.
• 
• The tool will now send the new program to your device.
• DO NOT unplug the wire or close the program while it is working!
• Wait until the tool shows a message like "Upgrade Done Success".

Step 6: Finish Up

• The fix is done! You can unplug the wire.
• Turn your device on. It should now work well.

What If the Computer Doesn't See It? (Restore Mode)

If you don't see the green box in Step 4, try this:

1. Hold a different button while you plug the wire in (like Volume Down or maybe Volume Up + Power at the same time).
2. Try a different wire or a different USB port on your computer.

Simple Tool vs. Hard Tool

• RockChip Factory Tool: Simple and fast. This is the best choice for you.
• AndroidTool: Has many buttons and is more complex. It's for people who know how to build programs.