Huawei Y6 Elite (LYO-L02) MT6735 Official Stock Firmware Downloads | Unbrick & Repair Guide

[Daniel]

Huawei Y6 Elite (LYO-L02) is a budget device frequently used by entry-level users, but commonly faces dead boot, stuck-on-logo, charging problems, failed updates, and IMEI or network errors after bad flash attempts. Flashing the correct stock firmware below has helped users restore dead phones, solve failed updates, and recover network/camera features. Always match exact firmware region/version for safety.

Warning:

Using the wrong firmware file, scatter, or region code can permanently brick your Y6 Elite or block network/camera. Always back up data and double-check your device model before flashing.

Huawei Y6 Elite (LYO-L02) Firmware Details​

Device	Huawei Y6 Elite
Model	LYO-L02
Chipset	MediaTek MT6735
Android Version	5.1 (Lollipop or custom region)
File Types	ZIP
Flashing Tool	SP Flash Tool (Windows/Linux)

Download Official Firmware for Y6 Elite (LYO-L02)​

Filename: Huawei_Y6_Elite_LYO-L02_MT6735_C712B102_19072016.zip

Size: 968MB

Build Version: C712B102

Download Link: Google Drive

Changelog: No official changelog available. Used to repair dead boot, failed upgrade, and IMEI/network faults based on user forum reports.

---

Filename: LYO-L02C718B124.zip

Size: 2.33GB

Build Version: C718B124

Download Link: Google Drive

Changelog: No public details. Peer reports show success for fixing stuck-on-TWRP/recovery, dead boot, and failed updates on LYO-L02.

---

Filename: Huawei_Y6_Elite_LYO-L02_(LYO-L02C712B102) Upload By M Shoaib.zip

Size: 963MB

Build Version: C712B102

Download Link: Google Drive

---

Filename: Huawei_Y6_Elite_LYO-L02_(LYO-L02C712B103) Upload By M Shoaib.zip

Size: 1GB

Build Version: C712B103

Download Link: Google Drive

---

The Requirements​

• Huawei Y6 Elite (LYO-L02, MT6735 chipset)
• Matching region firmware ZIP/Scatter file
• SP Flash Tool & MTK drivers
• Windows/Linux PC
• Battery above 60%
• Full user backup

---

How to Flash the Firmware​

1. Extract firmware ZIP and load scatter file in SP Flash Tool
2. Install drivers, power off phone, connect to PC (may need Vol- held)
3. Click Download/start flash
4. Wait for process to complete, phone will reboot
5. Setup device normally

For full images/tutorial, see SP Flash Tool guide here

More Flashing Guides:

MTK (SP Flash Tool): Guide Link

---

Disclaimer: All flashing is at user risk. The publisher provides no warranty for lost data, bricked device, or failed upgrades. Comment for support if you need help troubleshooting.