- Aug 3, 2025
- 325
- 0
The file lilac_jp_global_images_V14.0.34.0.TKNJPXM_20250225.0000.00_13.0_jp_3c554078c9.tgz is the official MIUI 14 (Android 13) Fastboot firmware for the Redmi Note 10T Japan (codename lilac) on the Japan (JPXM) branch.
Owners of the Redmi Note 10T commonly describe the device as fine for basics, but complaints about average camera quality and limited display brightness are also common, especially when used outdoors.
Use this MIUI 14 Japan Fastboot ROM if your Redmi Note 10T (lilac) is stuck after an update, needs a clean reinstall, or you want to return to the official JPXM branch.
For a full step-by-step walkthrough with images and videos, see:
How to flash Xiaomi Mi / POCO / Redmi firmware with Xiaomi Mi Flash Tool
What phone model is “lilac”?
The codename lilac refers to the Redmi Note 10T (Japan) on official firmware listings.
Is V14.0.34.0.TKNJPXM Android 13 or Android 14?
It is MIUI 14 based on Android 13.
What is the public changelog for V14.0.34.0.TKNJPXM?
Public trackers mention a February 2025 security patch and general system security improvements.
Can I install this JPXM ROM on a non-Japan Redmi Note 10T?
No. This ROM is intended only for the Japan (JPXM) variant and is not recommended for other regions.
Will flashing this ROM fix poor camera quality or low screen brightness?
Flashing can fix software issues, but camera quality and screen brightness are mostly hardware-limited and may not improve significantly.
Owners of the Redmi Note 10T commonly describe the device as fine for basics, but complaints about average camera quality and limited display brightness are also common, especially when used outdoors.
Important Warning for Redmi Note 10T (Japan) (lilac)
- Flash this ROM only on Redmi Note 10T Japan with codename lilac; flashing a ROM meant for another codename/model can permanently brick the phone.
- This is a Japan (JPXM) build (TKNJPXM); do not cross-flash it to non-Japan branches unless you fully understand the risks (OTA/update verification problems can happen).
- Fastboot flashing typically wipes user data (photos, apps, and internal storage), so create a full backup before proceeding.
- The safest reason to use this Fastboot ROM is to recover from software corruption (bootloop, failed OTA, stuck on logo) or to clean-install the correct Japan build.
Redmi Note 10T (Japan) Firmware Details
| Device | Redmi Note 10T (Japan) |
| Codename | lilac |
| Region / Branch | Japan (JPXM) – TKNJPXM |
| Android Version | Android 13.0 |
| MIUI Version | V14.0.34.0.TKNJPXM (MIUI 14, Stable) |
| Firmware type | Official Fastboot ROM (.tgz) |
| Build date | 2025-02-25 (from the firmware filename) |
| File size | 4.80GB |
| MD5 (Fastboot package) | 3c554078c9e44893db15dbcc6f236c78 |
| Security patch | February 2025 (as reported by MIUI update trackers) |
| Chipset | Qualcomm Snapdragon 480 5G |
| Recommended flashing tool | Xiaomi Mi Flash Tool |
Download Official Firmware for Redmi Note 10T (Japan) (lilac)
Use this MIUI 14 Japan Fastboot ROM if your Redmi Note 10T (lilac) is stuck after an update, needs a clean reinstall, or you want to return to the official JPXM branch.
- Filename: lilac_jp_global_images_V14.0.34.0.TKNJPXM_20250225.0000.00_13.0_jp_3c554078c9.tgz
- Size: 4.80GB
- Build Date: 2025-02-25
- Build Version: V14.0.34.0.TKNJPXM
- Android Version: 13.0
- Changelog (summary): Updated Android security patch to February 2025 and increased system security.
- Download Link: Xiaomi HugeOTA (Japan Fastboot)
The Requirements
- Redmi Note 10T Japan device (codename lilac) with at least 50% battery.
- Windows PC, good USB cable, and a stable USB port.
- Xiaomi USB drivers and Android platform-tools (ADB/Fastboot).
- Xiaomi Mi Flash Tool for Fastboot flashing.
- Complete backup of important data (Fastboot flashing can erase user data).
How to Flash the Firmware
- Download lilac_jp_global_images_V14.0.34.0.TKNJPXM_20250225.0000.00_13.0_jp_3c554078c9.tgz and confirm it matches the JPXM (TKNJPXM) branch.
- Boot the phone into Fastboot mode and connect it to your PC.
- Extract the
firmware until you see the Fastboot ROM folder with images and scripts.Code:
.tgz - Open Xiaomi Mi Flash Tool, load the extracted ROM folder, choose the appropriate flash option (clean flash is commonly used), and start flashing.
- After flashing completes, reboot and allow extra time for the first boot into MIUI 14.
For a full step-by-step walkthrough with images and videos, see:
How to flash Xiaomi Mi / POCO / Redmi firmware with Xiaomi Mi Flash Tool
Frequently Asked Questions (FAQs)
What phone model is “lilac”?
The codename lilac refers to the Redmi Note 10T (Japan) on official firmware listings.
Is V14.0.34.0.TKNJPXM Android 13 or Android 14?
It is MIUI 14 based on Android 13.
What is the public changelog for V14.0.34.0.TKNJPXM?
Public trackers mention a February 2025 security patch and general system security improvements.
Can I install this JPXM ROM on a non-Japan Redmi Note 10T?
No. This ROM is intended only for the Japan (JPXM) variant and is not recommended for other regions.
Will flashing this ROM fix poor camera quality or low screen brightness?
Flashing can fix software issues, but camera quality and screen brightness are mostly hardware-limited and may not improve significantly.
