Redmi A1 / Redmi A1+ / POCO C50 (ice) MIUI 13 Android 12 Fastboot Stock ROMs – Global, EEA, India, Russia, Indonesia, Taiwan

[Daniel]

The firmware files listed here are official MIUI 13 Android 12 Fastboot ROMs for the entry-level Redmi A1, Redmi A1+, and POCO C50 with the shared codename ice, covering Global, EEA, India, Russia, Indonesia, and Taiwan regions. These ultra-budget phones are appreciated for basic calling and light apps but many users complain about lag, app freezes, low internal storage, and delayed updates, and some of those problems can be reduced by performing a clean install of the correct MIUI 13 Fastboot ROM for their exact region and codename.

Important Warning for Redmi A1 / A1+ / POCO C50 (ice)​

• These ROMs are meant only for devices with codename ice (Redmi A1, Redmi A1+, POCO C50); flashing them on any other Xiaomi/Redmi/POCO model can permanently brick your phone.
• Always match the region suffix in your current build (SGMMIXM, SGMEUXM, SGMINXM, SGMRUXM, SGMIDXM, SGMTWXM) with the same suffix in the Fastboot ROM filename; cross-region flashing is risky and can break OTA updates or create network issues.
• Fastboot flashing normally wipes all user data on these devices; back up contacts, WhatsApp, photos, and any important files before flashing to avoid data loss.
• These phones use a low-end MediaTek platform and only 2–3 GB RAM, so even with fresh firmware they are not suited for heavy multitasking or gaming; firmware can fix software issues but cannot change hardware limits.

Redmi A1 / A1+ / POCO C50 (ice) Firmware Details​

Device	Redmi A1, Redmi A1+, POCO C50
Codename	ice (shared across Redmi A1 / A1+ / POCO C50)
Chipset	MediaTek Helio A22 / MT6761 platform as shown in firmware dumps.
OS version (these ROMs)	MIUI 13 for Android 12 (version codes V13.0.x.x.SGM****).
HyperOS status	HyperOS builds have begun to appear for this codename, but the packages in this article are MIUI 13 / Android 12 Fastboot ROMs, not HyperOS.
Firmware type	Official stock Fastboot ROMs (.tgz, ice_*_images_*.tgz) for full system restore or manual upgrade.
Typical flashing tool	Xiaomi Mi Flash Tool (Qualcomm/MediaTek Fastboot flashing) on Windows.
Known user complaints	Slow performance, app reloads due to low RAM, lack of storage after a few apps, and slow arrival of higher MIUI or HyperOS updates.

Download Official Firmware for Redmi A1 / A1+ / POCO C50 (ice)​

Below are the official MIUI 13 Android 12 Fastboot ROMs for the Redmi A1 / Redmi A1+ / POCO C50 (ice). Each file is tied to a region: Global (SGMMIXM), EEA (SGMEUXM), India (SGMINXM), Russia (SGMRUXM), Indonesia (SGMIDXM), and Taiwan (SGMTWXM). Before flashing, verify your current build’s suffix in Settings → About phone and pick the matching region to keep OTA behavior and network features intact.

Spoiler: Global (MIXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_global_images_V13.0.24.0.SGMMIXM_20240902.0000.00_12.0_88a9b0725e.tgz
• Size: 2.0 GB (Fastboot package; Xiaomi’s download page lists the paired Recovery ROM at about 1.4–1.5 GB).
• Build Date: 2024-09-02 (from filename; firmware databases list early September 2024 release).
• Build Version: V13.0.24.0.SGMMIXM (Global, Stable).
• Android Version: 12.0 (MIUI 13 / Android 12).
• Notes: Identified by trackers as the final or latest MIUI 13 Global build before HyperOS for Redmi A1 / POCO C50, with incremental bug fixes and security updates over earlier V13.0.19.0 and V13.0.20.0 releases.
• Download Link: Xiaomi BigOTA (Global Fastboot)

---

Spoiler: Russia (RUXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_ru_global_images_V13.0.15.0.SGMRUXM_20240903.0000.00_12.0_cecbfa6509.tgz
• Size: 1.93 GB.
• Build Date: 2024-09-03.
• Build Version: V13.0.15.0.SGMRUXM (Russia, Stable).
• Android Version: 12.0.
• Notes: Tailored for Russian Redmi A1 / POCO C50 variants; used when users want to fully restore Russian firmware after bootloops or failed updates.
• Download Link: Xiaomi BigOTA (Russia Fastboot)

---

Spoiler: Indonesia (IDXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_id_global_images_V13.0.14.0.SGMIDXM_20240903.0000.00_12.0_618c04b86a.tgz
• Size: 1.97 GB.
• Build Date: 2024-09-03.
• Build Version: V13.0.14.0.SGMIDXM (Indonesia, Stable).
• Android Version: 12.0.
• Notes: Listed on Xiaomi’s ROM pages as the full Indonesian build for this device; owners use it to revert to stock after issues with custom ROMs or to fix OTA corruption.
• Download Link: Xiaomi BigOTA (Indonesia Fastboot)

---

Spoiler: India (INXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_in_global_images_V13.0.17.0.SGMINXM_20241126.0000.00_12.0_23eb3d326d.tgz
• Size: 1.86 GB.
• Build Date: 2024-11-26.
• Build Version: V13.0.17.0.SGMINXM (India, Stable).
• Android Version: 12.0.
• Notes: India-branch firmware for Redmi A1 / POCO C50, typically including India-specific apps and settings; useful if your device originally shipped with SGMINXM.
• Download Link: Xiaomi BigOTA (India Fastboot)

---

Spoiler: EEA / Europe (EUXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_eea_global_images_V13.0.18.0.SGMEUXM_20240902.0000.00_12.0_c6e2eb289a.tgz
• Size: 2.00 GB.
• Build Date: 2024-09-02.
• Build Version: V13.0.18.0.SGMEUXM (EEA, Stable).
• Android Version: 12.0.
• Notes: EEA firmware branch complying with EU regulations; recommended only if your current system ends with SGMEUXM.
• Download Link: Xiaomi BigOTA (EEA Fastboot)

---

Spoiler: Taiwan (TWXM) – MIUI 13 Android 12 Fastboot ROM

• Filename: ice_tw_global_images_V13.0.3.0.SGMTWXM_20221106.0000.00_12.0_e94f7d8b11.tgz
• Size: 1.78 GB.
• Build Date: 2022-11-06.
• Build Version: V13.0.3.0.SGMTWXM (Taiwan, Stable – early MIUI 13 build).
• Android Version: 12.0.
• Notes: One of the earliest MIUI 13 TW releases for this device; useful mainly for restoring older TWXM phones back to stock if later updates are problematic.
• Download Link: Xiaomi BigOTA (Taiwan Fastboot)

---

The Requirements​

• A Redmi A1, Redmi A1+, or POCO C50 with codename ice, confirmed in Fastboot mode using

  fastboot getvar product

  (it must print

  ice

  ).
• Unlocked bootloader using Xiaomi’s official unlock procedure before trying to flash any Fastboot ROM.
• Windows PC with Xiaomi USB drivers and the latest Android platform-tools (ADB and Fastboot) installed.
• Good quality USB cable and a stable USB port to avoid disconnection while flashing.
• Xiaomi Mi Flash Tool for installing

  ice_*_images_V13.0.x.x.SGM****.tgz

  Fastboot firmware packages.
• Full backup of contacts, photos, chats, and other data because a clean flash will erase user data on the internal storage.

---

How to Flash the Firmware​

1. On your Redmi A1 / A1+ / POCO C50 (ice), check the current build number in Settings → About phone and note the suffix (for example, V13.0.24.0.SGMMIXM); download the matching Fastboot ROM such as

   ice_global_images_V13.0.24.0.SGMMIXM_20240902.0000.00_12.0_88a9b0725e.tgz

   if you are on the Global branch.
2. Boot the phone into Fastboot mode, connect it to your Windows PC, and run

   fastboot getvar product

   to confirm the codename is ice before flashing any of the Fastboot packages.
3. Extract the downloaded

   ice_*_images_V13.0.x.x.SGM****.tgz

   file on your PC until you see the Fastboot ROM folder containing the image files and configuration scripts.
4. Launch Xiaomi Mi Flash Tool, select the extracted Redmi A1 / POCO C50 (ice) ROM folder, choose the preferred flashing mode (clean flash is recommended if you are fixing bootloops or severe lag), and start the flashing process.
5. Wait for Xiaomi Mi Flash Tool to complete without errors, then disconnect and reboot your Redmi A1 / A1+ / POCO C50; the first boot into MIUI V13.0.24.0.SGMMIXM or your chosen version may take a few extra minutes.

If you want to see every flashing step with screenshots and videos for Xiaomi phones using Mi Flash, follow the full tutorial here:
how to flash Xiaomi, POCO, and Redmi smartphone firmware files with Xiaomi Mi Flash Tool.

---

Frequently Asked Questions (FAQs)​

Spoiler: Which phones use the codename “ice”?

The codename ice is used by Xiaomi for the Redmi A1, Redmi A1+, and POCO C50 series, and official firmware and dump repositories clearly show this mapping.

Spoiler: Are the V13.0.24.0.SGMMIXM and similar builds Android 12 or Android 13?

All builds listed here (V13.0.x.x.SGM****) are MIUI 13 releases based on Android 12, not Android 13, as stated in official MIUI and firmware pages.

Spoiler: How do I choose the right MIUI 13 Fastboot ROM for my Redmi A1 / POCO C50?

Look at the last part of your current system version, such as SGMMIXM (Global) or SGMEUXM (EEA), and download the corresponding Fastboot file with the same suffix from the list above.

Spoiler: Will flashing V13.0.24.0.SGMMIXM improve performance on my Redmi A1 / POCO C50?

Firmware sites describe V13.0.24.0.SGMMIXM as an incremental stable update with security and stability improvements; it can fix software problems from older builds, but the device still has basic hardware so overall speed remains modest.

Spoiler: Do these MIUI 13 ROMs support HyperOS features?

No, these files are MIUI 13 Android 12 Fastboot ROMs; HyperOS builds for the same devices are listed separately and use different version patterns, so you should not expect HyperOS-specific features from these packages.

Spoiler: Can I flash a Global ROM (SGMMIXM) on an Indian phone (SGMINXM)?

Community and firmware sources recommend staying on the same regional branch (MIXM, EUXM, INXM, RUXM, IDXM, TWXM) because cross-region flashing can break OTA and possibly affect local features, and should only be attempted by advanced users.

Spoiler: Is an unlocked bootloader required to flash these Fastboot ROMs?

Yes, Xiaomi’s Fastboot flashing process for full images generally requires an unlocked bootloader on Redmi A1 / A1+ / POCO C50, and attempting to flash with a locked bootloader may fail or risk problems.