- Aug 3, 2025
- 335
- 0
The Hotwav M5 is an entry-level Android smartphone featuring a MediaTek MT6739 chipset. Users in Dubai and similar regions have reported common problems such as boot loop, stuck on logo, dead recovery, FRP lock, software glitches, charging issues, and system instability. This official firmware file (Dubai V0.7.1, 18/10/19) is designed to address these issues and restore your device to full working order. Read the warnings before proceeding!
Warning: Flashing the wrong firmware can permanently damage your Hotwav M5. Be sure to use this file only for the exact Dubai version and MT6739 chipset. Always back up your device and proceed with caution!
Hotwav M5 Firmware Details
Download Official Firmware for Hotwav M5 (Dubai MT6739)
Filename: Hotwav_M5_MT6739_Dubai_V0.7.1_181019.zip
Size: 1.37GB
Build Date: 19-Oct-2018
Build Version: V0.7.1 (Dubai)
Android Version: Android 8.1 Oreo
Download Link: Download from Google Drive
The Requirements
How to Flash the Firmware
To view all steps with pictures and videos for MediaTek devices, go here.
Disclaimer: All firmware links are provided for restoration purposes and community repair. We cannot be held responsible for any device damage, data loss, or bricking resulting from the flashing procedure. Ask questions or share your problems in the comments for support.
Warning: Flashing the wrong firmware can permanently damage your Hotwav M5. Be sure to use this file only for the exact Dubai version and MT6739 chipset. Always back up your device and proceed with caution!Hotwav M5 Firmware Details
| Model | Hotwav M5 |
|---|---|
| Chipset | MediaTek MT6739 |
| RAM | 2GB |
| Storage | 16GB, expandable via microSD |
| Android Version | Android 8.1 Oreo |
| Firmware Version | V0.7.1 Dubai |
| Build Date | 19 October 2018 |
| File Size | 1.37GB |
| File Type | .zip (Compressed Stock ROM) |
| Flashing Tool | SP Flash Tool |
| SIM | Dual nanoSIM, dual standby |
| Other Features | Fingerprint, 16MP rear camera, 8MP front camera |
Download Official Firmware for Hotwav M5 (Dubai MT6739)
Filename: Hotwav_M5_MT6739_Dubai_V0.7.1_181019.zip
Size: 1.37GB
Build Date: 19-Oct-2018
Build Version: V0.7.1 (Dubai)
Android Version: Android 8.1 Oreo
Download Link: Download from Google Drive
- Changelog / Issues Fixed:
- Boot loop and stuck-on-logo issues fixed
- Dead recovery and device won't boot problem solved
- FRP (Google account) lock removal supported
- Resolved charging and battery calibration bugs
- Fixes for system crashes and random reboots
- Restores device from software brick state
- General performance and stability improved
- Boot loop and stuck-on-logo issues fixed
The Requirements
- A Windows PC or laptop
- SP Flash Tool software installed
- MTK (MediaTek) USB drivers installed
- Good quality USB cable
- 50%+ battery charge on phone
- Full backup of phone data
How to Flash the Firmware
- Download and extract the Hotwav M5 firmware ZIP to your PC.
- Open SP Flash Tool and load the scatter text file (“MT6739_Android_scatter.txt”) from the extracted firmware.
- Connect your switched-off Hotwav M5 to your PC via USB cable (hold Volume Down simultaneously).
- Click “Download” on SP Flash Tool to start flashing and wait for a confirmation (“green tick”).
- Disconnect and power on your device. Boot-up may take several minutes.
To view all steps with pictures and videos for MediaTek devices, go here.
Disclaimer: All firmware links are provided for restoration purposes and community repair. We cannot be held responsible for any device damage, data loss, or bricking resulting from the flashing procedure. Ask questions or share your problems in the comments for support.
